Certificate/Reg.-No. | 968/EL 843.00/12 |
Type of Certificate | A-FS&CS Certificate |
Certificate Holder | CNOOC China |
Manufacturer | Yokogawa Europe Solutions B.V. |
Product Category | Safety Instrumented Systems / SRECS / Safety Functions > HIPPS |
Subject | Design of the Liwan 3-1 Onshore High Integrity Pressure Protection System (HIPPS) |
Type Designation | Liwan 3-1 Onshore HIPPS Cubicle ID: 110 (HIPPS) |
Codes and Standards |
|
Scope and Result | The intended design of the Liwan 3-1 Onshore High Integrity Pressure Protection System (HIPPS) complies with the requirements of IEC 61508 (Phase 10 of the safety life cycle) and IEC 61511 (Phase 4 of the safety life cycle) for SIL 3. |
Specific Provisions | The instructions of the associated Installation and Operating Manuals and the Safety Manuals of used subsystem elements shall be considered. Recommendation: The applied partial stroke test shall be automatic and suitable to perform the claimed diagnostic (e.g. detection of closing delay etc.). The requirements for system behaviour on detection of a fault stated in the IEC 61508-2:2010 (ยง7.4.8) shall be implemented. The recommendations of the actuator manufacturer regarding to the PVST frequency shall be followed. |
Valid Until | no expiry date |
Appendixes | n/a |
Download Certificate | 968_EL_843_00_12_en_el.pdf |
Certificate/Reg.-No. | Certificate Holder | Product Category | Product Tested | Type Designation | Details |
---|
968/EL 843.00/12 | CNOOC China | Safety Instrumented Systems / SRECS / Safety Functions → HIPPS | Design of the Liwan 3-1 Onshore High Integrity Pressure Protection System (HIPPS) | Liwan 3-1 Onshore HIPPS Cubicle ID: 110 (HIPPS) | View Details | View PDF |
Remark: In case of missing entries this is due to restrictions by the certificate holder