Certificate/Reg.-No. | 968/EL 855.00/12 |
Type of Certificate | A-FS&CS Certificate |
Certificate Holder | Frames Energy Systems B.V. |
Manufacturer | Frames Energy Systems B.V. |
Product Category | Safety Instrumented Systems / SRECS / Safety Functions > HIPPS |
Subject | Design and validation documentation of the High Integrity Pressure Protection Systems for the Enppi BAPETCO NEAG 1 Surface Facilities. "High Integrity Pressure Protection System with mechanical initiators" |
Type Designation | Frames project number XO 29580 SIS 1: Production header SIS 2: Test header |
Codes and Standards |
|
Scope and Result | The intended design of the two mechanical HIPPS complies with the requirements of the standards IEC 61511 and IEC 61508 for SIL 3. |
Specific Provisions | The instructions given by the HIPPS supplier and the safety documentation delivered by the components suppliers have to be observed. During validation testing the end-user needs to verify that the safety functions can be executed as required in the Safety Requirement Specification. Mode of operation: Low Demand Mode Proof test interval: 1/2 year (full stroke test T1 = 4380 h) Design lifetime: 5 years |
Valid Until | no expiry date |
Appendixes | n/a |
Download Certificate | 968_EL_855_00_12_en_el.pdf |
Certificate/Reg.-No. | Certificate Holder | Product Category | Product Tested | Type Designation | Details |
---|
968/EL 855.00/12 | Frames Energy Systems B.V. | Safety Instrumented Systems / SRECS / Safety Functions → HIPPS | Design and validation documentation of the High Integrity Pressure Protection Systems for the Enppi BAPETCO NEAG 1 Surface Facilities. "High Integrity Pressure Protection System with mechanical initiators" | Frames project number XO 29580 SIS 1: Production header SIS 2: Test header | View Details | View PDF |
Remark: In case of missing entries this is due to restrictions by the certificate holder