| Certificate/Reg.-No. | 968/FSP 2691.00/24 |
| Type of Certificate | A-FS&CS Certificate |
| Certificate Holder | Beijing Pinghe Chuangye Technology Development Co., Ltd. |
| Manufacturer | Beijing Pinghe Chuangye Technology Development Co., Ltd. |
| Product Category | Logic Units > Relay Safety Modules |
| Subject | Safety Relay Module |
| Type Designation | PH6000 series Details see Revision List |
| Codes and Standards |
|
| Scope and Result | The products PH6000 series safety relay modules comply with the requirements of the relevant standard (SIL 2, SC 3 acc. to IEC 61508) and can be used in low demand applications in a single channel architecture up to SIL 2 and in a redundant channel architecture up to SIL 3 acc. to IEC 61508. Since the PH6000 series safety relay modules have been assessed according to the requirements of IEC 61508 for SIL 2 / SC 3, it can be used in the application area of IEC 61511-1:2016 + Corr.1:2016 + AMD1:2017. The PH6000 series safety relay modules comply with the relevant requirements of IEC 61298-3:2008 clause 5, 6, 7, 8. The EMC requirements were assessed according to IEC 61298-3:2008 clause 12.5, 12.6, 12.10, 15, 16, 17 and IEC 61326-3-1:2017. |
| Specific Provisions | The integrator/user is obliged to validate the assumptions and constraints defined by the manufacturer, under consideration of the instructions of the associated Safety Manual. |
| Valid Until | no expiry date |
| Appendixes | FSP_2691_00_24_RL_2024_08_23.pdf |
| Download Certificate | 968_FSP_2691_00_24_en_el.pdf |
| Certificate/Reg.-No. | Certificate Holder | Product Category | Product Tested | Type Designation | Details |
|---|
| 968/FSP 2691.00/24 | Beijing Pinghe Chuangye Technology Development Co., Ltd. | Logic Units → Relay Safety Modules | Safety Relay Module | PH6000 series Details see Revision List | View Details | View PDF |
Remark: In case of missing entries this is due to restrictions by the certificate holder
