|Type of Certificate||EC Type-Examination Certificate (Machinery Directive)|
|Certificate Holder||Banner Engineering Corp.|
|Product Category||Logic Units > Relay Safety Modules|
|Product Tested||Safety Control Modules|
|Type Designation||AT-FM-10K Two-Hand Safety Control Module,
GM-FA-10J-x Gate Monitoring Safety Control Modules
|Codes and Standards||
|Intended Application||The Safety Control Modules are intended to be part of safety related control systems of machines, where the safe state is the de-energized state.
In combination with self-checking touch buttons (STB) or hard contacts the AT-FM-10K can be used as Type IIIC 2-hand control module acc. to EN 574/ISO 13851 in applications up to Cat. 4/PL e and SIL 3.
If connected to suitable interlock switches the GM-FA-10J-x modules comply with PDDB acc. IEC 60947-5-3 and can be used in guard position monitoring applications up to Cat. 4/PL e and SIL 3.
|Specific Requirements||The instructions of the associated Installation, Operating and Safety Manual shall be considered.|
|Certificate/Reg.-No.||Certificate Holder||Product Category||Product Tested||Type Designation||Details|
Remark: In case of missing entries this is due to restrictions by the certificate holder