|Type of Certificate||EC Type-Examination Certificate (Machinery Directive)|
|Certificate Holder||ABB AB / Jokab Safety|
|Product Category||Logic Units > Compact Controllers|
|Product Tested||Safety PLC|
for certified HW and SW versions see current "Revision List"
|Codes and Standards||
|Intended Application||Safety-related programmable electronic system for machinery, process industry (IEC 61511-1) and furnaces applications (EN 50156-1).
The variants of the Pluto PLC comply with the requirements of the relevant standards (Cat. 4 / PL e acc. to EN ISO 13849-1, SIL CL 3 acc. to EN 62061 / IEC 61508 / EN 50156-2, Type IIIC of EN 574 / ISO 13851, Type 4 of EN 61496-1). They are suitable for the use in applications up to Cat. 4 / PL e and SIL 3.
|Specific Requirements||The current "Revision List" as well as the conditions defined in the Programming Manual, Safety Manual and the Operating Instructions must be considered.|
|Certificate/Reg.-No.||Certificate Holder||Product Category||Product Tested||Type Designation||Details|
Remark: In case of missing entries this is due to restrictions by the certificate holder