A-FS&CS Certificate
This certificate is issued by the Certification Body “Safety and Security for Automation & Grid” at the business area Automation – Functional Safety & Cyber Security for Hardware / Software products. The issue is based upon a documented voluntary assessment of the product by the accredited certification body.
With the assessment of these kinds of products it is shown that the product tested meets the requirements of the relevant standards and the product specification of the manufacturer and is therefore suitable for the specified use under consideration of the conditions specified in the installation and operating instructions for the product.
So far the product tested is intended for the use in safety-related applications a safety performance is shown in accordance with a specified safety level (SIL, PL, etc.) following the requirements of the relevant standards, and that they therefor are suitable for the use in safety functions up to the defined SIL / PL.
All relevant aspects concerning product/electrical safety, functional safety and the aptitude to operate as specified under the defined environmental and ambient conditions as well as the information for the user are inspected.
View all Types of Certificates›
Certificate Details
x
Print |
Bookmark
Certificate/Reg.-No. |
968/EZ 555.02/19 |
Type of Certificate |
|
Certificate Holder |
ABB AB / Jokab Safety |
Manufacturer | IDEM Safety Switches Ltd. |
Product Category |
Sensors, Transmitters, Guards > Guard Interlocking Devices |
Subject |
Safety Rope Switches |
Type Designation |
LineStrong1,
LineStrong2
LineStrong2Z
LineStrong3D, 3L, 3R
LineStrong3DZ, 3LZ, 3RZ |
Codes and Standards |
- IEC 60947-5-5:1997+ A1:2005 + A2:2016
- EN 60947-5-5:1997+ A1:2005 + A11:2013 + A2:2017
- IEC 60947-5-1:2016
- EN 60947-5-1:2017
- ISO 13850:2015
|
Scope and Result |
The products comply with the requirements of the listed standards.
The Safety Rope Switches may be used as part of the safety related control system to perform the emergency stop function in accordance with EN ISO 13850. |
Specific Provisions |
The instruction of the associated Installation and Operating Manual shall be considered. |
Valid Until |
2024-02-15 (Certificate expired) |
Appendixes |
n/a |
Download Certificate |
968_EZ_555_02_19_de_en_el.pdf |
TÜV Rheinland