A-FS&CS Certificate
This certificate is issued by the Certification Body “Safety and Security for Automation & Grid” at the business area Automation – Functional Safety & Cyber Security for Hardware / Software products. The issue is based upon a documented voluntary assessment of the product by the accredited certification body.
With the assessment of these kinds of products it is shown that the product tested meets the requirements of the relevant standards and the product specification of the manufacturer and is therefore suitable for the specified use under consideration of the conditions specified in the installation and operating instructions for the product.
So far the product tested is intended for the use in safety-related applications a safety performance is shown in accordance with a specified safety level (SIL, PL, etc.) following the requirements of the relevant standards, and that they therefor are suitable for the use in safety functions up to the defined SIL / PL.
All relevant aspects concerning product/electrical safety, functional safety and the aptitude to operate as specified under the defined environmental and ambient conditions as well as the information for the user are inspected.
View all Types of Certificates›
Certificate Details
x
Print |
Bookmark
Certificate/Reg.-No. |
968/FSP 1804.00/19 |
Type of Certificate |
|
Certificate Holder |
ASIA Industrieautomation GmbH |
Product Category |
Software > Others |
Subject |
Sicherheitsgerichtete Softwareparametrierung-Bildung und Übertragung binärer und digitaler Signale vom Controller (ABB/Freelance) zu einer SSPS von ABB (AC500S), HIMA (programmiert mit ELOPII / SILworX) oder Siemens (S7-300) |
Type Designation |
FreelanceSafe FSDUE V1.00 Ausgabe 1836
(Bezeichnungen und Versionder Funktionsbausteinen siehe Anhang des Berichtes) |
Codes and Standards |
- IEC 62061:2005+ A1:2012 + A2:2015 (in extracts)
- IEC 61508-2:2010 (in extracts)
- IEC 61511-2:2016 (in extracts)
- IEC 61511-1:2016 (in extracts)
- ISO 13849-1:2015 (in extracts)
|
Scope and Result |
Das System, bestehend aus verschiedenen Funktionsbausteinen, ist geeignet, sicherheitsbezogene Parametrierung für SIL 3 Anwendungen nach IEC 61508,
IEC 61511 und IEC 62061 sowie nach ISO 13849 PL e durchzuführen. |
Specific Provisions |
Die Hinweise in dem zugehörigen Handbuch sind zu beachten. |
Valid Until |
2024-05-29 |
Appendixes |
n/a |
Download Certificate |
968_FSP_1804_00_19_de_el.pdf |
TÜV Rheinland