Certificate/Reg.-No. | 968/EZ 645.01/19 |
Type of Certificate | A-FS&CS Certificate |
Certificate Holder | Endress + Hauser Flowtec AG |
Manufacturer | Endress + Hauser Flowtec AG |
Product Category | Sensors, Transmitters, Guards > for Flow Rate |
Subject | Flow rate meter for the safe measurement of volume flow |
Type Designation | Proline Prowirl 200 with the IO-Modules: "IO211 Ex-i, 212 Ex-d" (Option A, B) or "IO216 Ex-i, 217 Ex-d" (Option C) or "IO218 Ex-i, 219 Ex-d" (Option D) |
Codes and Standards |
|
Scope and Result | The device complies with the requirements of the relevant standards (HW Safety Integrity SIL 2 and Systematic Capability SC 3 acc. to IEC 61508) and can be used in applications up to SIL 2 (HFT = 0) resp. SIL 3 (HFT = 1) acc. to IEC 61508 for the safety function measurement of volume flow rate with proportional safety related output at the first 4-20mA current interface. |
Specific Provisions | The instructions of the associated Installation and Operating Manual shall be considered. |
Valid Until | 2024-07-31 |
Appendixes | n/a |
Download Certificate | 968_EZ_645_01_19_de_en_el.pdf |
Certificate/Reg.-No. | Certificate Holder | Product Category | Product Tested | Type Designation | Details |
---|
968/EZ 645.01/19 | Endress + Hauser Flowtec AG | Sensors, Transmitters, Guards → for Flow Rate | Flow rate meter for the safe measurement of volume flow | Proline Prowirl 200 with the IO-Modules: "IO211 Ex-i, 212 Ex-d" (Option A, B) or "IO216 Ex-i, 217 Ex-d" (Option C) or "IO218 Ex-i, 219 Ex-d" (Option D) | View Details | View PDF |
Remark: In case of missing entries this is due to restrictions by the certificate holder