A-FS&CS Certificate
This certificate is issued by the Certification Body “Safety and Security for Automation & Grid” at the business area Automation – Functional Safety & Cyber Security for Hardware / Software products. The issue is based upon a documented voluntary assessment of the product by the accredited certification body.
With the assessment of these kinds of products it is shown that the product tested meets the requirements of the relevant standards and the product specification of the manufacturer and is therefore suitable for the specified use under consideration of the conditions specified in the installation and operating instructions for the product.
So far the product tested is intended for the use in safety-related applications a safety performance is shown in accordance with a specified safety level (SIL, PL, etc.) following the requirements of the relevant standards, and that they therefor are suitable for the use in safety functions up to the defined SIL / PL.
All relevant aspects concerning product/electrical safety, functional safety and the aptitude to operate as specified under the defined environmental and ambient conditions as well as the information for the user are inspected.
View all Types of Certificates›
Certificate Details
x
Print |
Bookmark
Certificate/Reg.-No. |
968/FSP 1958.00/20 |
Type of Certificate |
|
Certificate Holder |
BEI Sensors |
Manufacturer | BEI Sensors |
Product Category |
Logic Units > Safety PLCs > Input / Output Modules |
Subject |
Signal Splitter for Incremental Encoders (Connection Module) |
Type Designation |
EAR-001 / EAR-002,
EAR-005 / EAR-006 |
Codes and Standards |
- IEC 61800-5-2:2016
- IEC 62061:2015
- EN ISO 13849-1:2015
- IEC 61508 Parts 1-7:2010
|
Scope and Result |
Signal splitter for safety-related incremental encoders. The splitter does not perform a safety function. It does not have an impact to the safety related signals connected. It and can be used in applications up to Cat. 4 / PL e acc. to EN ISO 13849-1 and SIL 3 acc. to IEC 62061 / IEC 61508. |
Specific Provisions |
The instructions of the associated Installation and Safety Manual shall be considered. |
Valid Until |
2025-01-10 |
Appendixes |
n/a |
Download Certificate |
968_FSP_1958_00_20_en_el.pdf |
TÜV Rheinland