Certificate/Reg.-No. | 968/FSP 2048.00/21 |
Type of Certificate | A-FS&CS Certificate |
Certificate Holder | Dynisco |
Product Category | Sensors, Transmitters, Guards > for Pressure |
Subject | Pressure Transmitter |
Type Designation | Vertex Pressure Transmitter Details see attached Revision List |
Codes and Standards |
|
Scope and Result | Pressure transmitter for pressure measurement of liquids and gases. The 4-20mA output signal proportional to pressure complies with the requirements according to SIL 2/SC 3 of the stated standards and can be used in a safety-related system acc. IEC 61508, EN 62061, and IEC 61511-1:2016 + Corr.1:2016 + AMD1:2017 in HFT=0 configurations up to SIL2 and acc. ISO 13849-1 up to PL d, Cat 2. Furthermore the 4-20mA channel can be used a redundant configuration (HFT=1) up to SIL 3 acc. IEC 61508, EN 62061, and IEC 61511-1:2016 + Corr.1:2016 + AMD1:2017 and acc. ISO 13849-1 up to PL e, Cat 3. For details see Annex to Test Report. The Guardian monitoring channel relay signal has the same ratings as the 4-20mA output signal described above. |
Specific Provisions | The Operating Instructions and the Safety Manual shall be considered. |
Valid Until | no expiry date |
Appendixes |
TP-6031_SIL_Sheet.pdf FSP_968_2048_00_21_RL_2021_06_22.pdf |
Download Certificate | 968_FSP_2048_00_21_en_el.pdf |
Certificate/Reg.-No. | Certificate Holder | Product Category | Product Tested | Type Designation | Details |
---|
968/FSP 2048.00/21 | Dynisco | Sensors, Transmitters, Guards → for Pressure | Pressure Transmitter | Vertex Pressure Transmitter Details see attached Revision List | View Details | View PDF |
Remark: In case of missing entries this is due to restrictions by the certificate holder