Certificate/Reg.-No. | 968/V 1162.00/20 |
Type of Certificate | A-FS&CS Certificate |
Certificate Holder | Darco SAS |
Manufacturer | Darco SAS |
Product Category | Actuators > Valves |
Subject | Ball Valves |
Type Designation | D1B, D5, D6 |
Codes and Standards |
|
Scope and Result | Safety function: - Move the valve to the safe position (which can be either open or closed as required by the application and depending on the manoeuvring means' configuration) within the specified safety time (1 second per diameter) when the system is tripped - maintain the internal (tight cut off) and external tightness (no visible leakage) The valves are suitable for use in a safety instrumented system up to SIL 2. Under consideration of the minimum required hardware fault tolerance HFT=1 the valves may be used in a redundant structure up to SIL 3 according to IEC 61508 and IEC 61511:2016 + AMD 1:2017. |
Specific Provisions | The instructions of the associated Installation and Operating Manual shall be considered. |
Valid Until | 2025-05-20 |
Appendixes | n/a |
Download Certificate | 968_V_1162_00_20_en_el.pdf |
Certificate/Reg.-No. | Certificate Holder | Product Category | Product Tested | Type Designation | Details |
---|
968/V 1162.00/20 | Darco SAS | Actuators → Valves | Ball Valves | D1B, D5, D6 | View Details | View PDF |
Remark: In case of missing entries this is due to restrictions by the certificate holder