A-FS&CS Certificate
This certificate is issued by the Certification Body “Safety and Security for Automation & Grid” at the business area Automation – Functional Safety & Cyber Security for Hardware / Software products. The issue is based upon a documented voluntary assessment of the product by the accredited certification body.
With the assessment of these kinds of products it is shown that the product tested meets the requirements of the relevant standards and the product specification of the manufacturer and is therefore suitable for the specified use under consideration of the conditions specified in the installation and operating instructions for the product.
So far the product tested is intended for the use in safety-related applications a safety performance is shown in accordance with a specified safety level (SIL, PL, etc.) following the requirements of the relevant standards, and that they therefor are suitable for the use in safety functions up to the defined SIL / PL.
All relevant aspects concerning product/electrical safety, functional safety and the aptitude to operate as specified under the defined environmental and ambient conditions as well as the information for the user are inspected.
View all Types of Certificates›
Certificate Details
x
Print |
Bookmark
Certificate/Reg.-No. |
968/EZ 375.03/20 |
Type of Certificate |
|
Certificate Holder |
Eaton Industries GmbH |
Product Category |
Actuators > Contact Extension Units |
Subject |
Safety relay module as contact extension block with delayed contacts |
Type Designation |
ESR5-VE3-42 |
Codes and Standards |
- EN ISO 13849-1:2015
- EN 62061:2005+ AC:2010 + A1:2013 + A2:2015
- IEC 61508-2:2010
- EN 50178:1997
|
Scope and Result |
In combination with a suitable diagnostic system, which monitors the feedback contacts, the devices can be used as a contact expansion block with adjustable delayed opening contacts in safety applications up to SIL 3 / SIL CL 3 acc. to
IEC 61508 / EN 62061 and fulfil the requirements up to category 3 and PL e acc. to
EN ISO 13849-1. |
Specific Provisions |
The instructions of the associated Installation and Operating Manual shall be considered. |
Valid Until |
2025-05-27 |
Appendixes |
n/a |
Download Certificate |
968_EZ_375_03_20_de_en_el.pdf |
TÜV Rheinland