A-FS&CS Certificate
This certificate is issued by the Certification Body “Safety and Security for Automation & Grid” at the business area Automation – Functional Safety & Cyber Security for Hardware / Software products. The issue is based upon a documented voluntary assessment of the product by the accredited certification body.
With the assessment of these kinds of products it is shown that the product tested meets the requirements of the relevant standards and the product specification of the manufacturer and is therefore suitable for the specified use under consideration of the conditions specified in the installation and operating instructions for the product.
So far the product tested is intended for the use in safety-related applications a safety performance is shown in accordance with a specified safety level (SIL, PL, etc.) following the requirements of the relevant standards, and that they therefor are suitable for the use in safety functions up to the defined SIL / PL.
All relevant aspects concerning product/electrical safety, functional safety and the aptitude to operate as specified under the defined environmental and ambient conditions as well as the information for the user are inspected.
View all Types of Certificates›
Certificate Details
x
Print |
Bookmark
Certificate/Reg.-No. |
968/FSP 2135.00/20 |
Type of Certificate |
|
Certificate Holder |
BDF DIGITAL S.p.A. |
Product Category |
Logic Units > Power Drive Systems (safety-related) |
Subject |
Safety Function Safe Torque Off (STO) in the OPDE PLUS drive controllers |
Type Designation |
OPDE PLUS xxxx,
for details see current Revision List |
Codes and Standards |
- IEC 61800-5-2:2016
- IEC 61800-5-1:2007+ A1:2016 (in extracts)
- IEC 61800-3:2017 (in extracts)
- ISO 13849-1:2015
- IEC 62061:2005+ A1:2012 + A2:2015
- IEC 61508 Parts 1-7:2010
|
Scope and Result |
Safety of Machinery. The product complies with the requirements of the relevant standards (Cat. 3 / PL e according to ISO 13849-1, SILCL 3 according to IEC 62061 and SIL 3 according to IEC 61800-5-2 / IEC 61508) and can be used in applications up to PL e according to ISO 13849-1 and SIL 3 according to IEC 62061 / IEC 61508. |
Specific Provisions |
The instructions of the associated Installation and Operating Manual shall be considered. |
Valid Until |
2025-10-28 |
Appendixes |
968_FSP_2135_00_20_RL_2020_10_21.pdf |
Download Certificate |
968_FSP_2135_00_20_en_el.pdf |
TÜV Rheinland