A-FS&CS Certificate
This certificate is issued by the Certification Body “Safety and Security for Automation & Grid” at the business area Automation – Functional Safety & Cyber Security for Hardware / Software products. The issue is based upon a documented voluntary assessment of the product by the accredited certification body.
With the assessment of these kinds of products it is shown that the product tested meets the requirements of the relevant standards and the product specification of the manufacturer and is therefore suitable for the specified use under consideration of the conditions specified in the installation and operating instructions for the product.
So far the product tested is intended for the use in safety-related applications a safety performance is shown in accordance with a specified safety level (SIL, PL, etc.) following the requirements of the relevant standards, and that they therefor are suitable for the use in safety functions up to the defined SIL / PL.
All relevant aspects concerning product/electrical safety, functional safety and the aptitude to operate as specified under the defined environmental and ambient conditions as well as the information for the user are inspected.
View all Types of Certificates›
Certificate Details
x
Print |
Bookmark
Certificate/Reg.-No. |
968/V 1199.04/20 |
Type of Certificate |
|
Certificate Holder |
Albrecht Automatik GmbH |
Manufacturer | Albrecht Automatik GmbH |
Product Category |
Actuators > Valves |
Subject |
Safety Shut-Off Valve |
Type Designation |
ASVG/N, ASVG/P, ASVG/Z, ASVG/R, ASVG/O |
Codes and Standards |
- IEC 61508 Parts 1-2 and 4-7:2010
|
Scope and Result |
Safety Function: Move into safe position on loss of auxiliary energy and safe shut off of medium flow.
The valves are suitable for use in a safety instrumented system up to SIL 2. Under consideration of the minimum required hardware fault tolerance HFT=1 the valves may be used in a redundant structure up to SIL 3. |
Specific Provisions |
The instructions of the associated Installation, Operating and Safety Manual shall be considered. |
Valid Until |
2025-11-25 |
Appendixes |
n/a |
Download Certificate |
968_V_1199_04_20_de_en_el.pdf |
TÜV Rheinland