A-FS&CS Certificate
This certificate is issued by the Certification Body “Safety and Security for Automation & Grid” at the business area Automation – Functional Safety & Cyber Security for Hardware / Software products. The issue is based upon a documented voluntary assessment of the product by the accredited certification body.
With the assessment of these kinds of products it is shown that the product tested meets the requirements of the relevant standards and the product specification of the manufacturer and is therefore suitable for the specified use under consideration of the conditions specified in the installation and operating instructions for the product.
So far the product tested is intended for the use in safety-related applications a safety performance is shown in accordance with a specified safety level (SIL, PL, etc.) following the requirements of the relevant standards, and that they therefor are suitable for the use in safety functions up to the defined SIL / PL.
All relevant aspects concerning product/electrical safety, functional safety and the aptitude to operate as specified under the defined environmental and ambient conditions as well as the information for the user are inspected.
View all Types of Certificates›
Certificate Details
x
Print |
Bookmark
Certificate/Reg.-No. |
968/EZ 554.03/21 |
Type of Certificate |
|
Certificate Holder |
ABB AB / Jokab Safety |
Product Category |
Sensors, Transmitters, Guards > Position / Proximity Switches |
Subject |
Non-Contact Coded Safety Switches |
Type Designation |
Sense1, Sense3, Sense3Z, Sense5Z, Sense7,Sense7Z, Sense9, Sense9Z, Sense11, Sense11Z |
Codes and Standards |
- IEC 60947-5-3:2013
- ISO 13849-1:2015
- ISO 14119:2013
|
Scope and Result |
The coded Non-Contact Safety Switches in combination with an external control/monitoring device comply with the requirements of Cat. 4 / PL e in accordance with ISO 13849-1. They comply also with the product standard IEC 60947-5-3 as a PDDB and are type 4 devices with low coding in accordance with ISO 14119. |
Specific Provisions |
If the products are used in safety related applications with infrequently operated guards, then the safety function shall be checked for hidden faults at least once per year for PL d and at least once per month for PL e. The provisions described in the user documentation shall be considered for the application. |
Valid Until |
2025-12-17 |
Appendixes |
n/a |
Download Certificate |
968_EZ_554_03_21_en_el.pdf |
TÜV Rheinland