| Certificate/Reg.-No. | 968/EZ 554.03/21 |
| Type of Certificate | A-FS&CS Certificate |
| Certificate Holder | ABB AB / Jokab Safety |
| Product Category | Sensors, Transmitters, Guards > Position / Proximity Switches |
| Subject | Non-Contact Coded Safety Switches |
| Type Designation | Sense1, Sense3, Sense3Z, Sense5Z, Sense7,Sense7Z, Sense9, Sense9Z, Sense11, Sense11Z |
| Codes and Standards |
|
| Scope and Result | The coded Non-Contact Safety Switches in combination with an external control/monitoring device comply with the requirements of Cat. 4 / PL e in accordance with ISO 13849-1. They comply also with the product standard IEC 60947-5-3 as a PDDB and are type 4 devices with low coding in accordance with ISO 14119. |
| Specific Provisions | If the products are used in safety related applications with infrequently operated guards, then the safety function shall be checked for hidden faults at least once per year for PL d and at least once per month for PL e. The provisions described in the user documentation shall be considered for the application. |
| Valid Until | 2025-12-17 |
| Appendixes | n/a |
| Download Certificate | 968_EZ_554_03_21_en_el.pdf |
| Certificate/Reg.-No. | Certificate Holder | Product Category | Product Tested | Type Designation | Details |
|---|
| 968/EZ 554.03/21 | ABB AB / Jokab Safety | Sensors, Transmitters, Guards → Position / Proximity Switches | Non-Contact Coded Safety Switches | Sense1, Sense3, Sense3Z, Sense5Z, Sense7,Sense7Z, Sense9, Sense9Z, Sense11, Sense11Z | View Details | View PDF |
Remark: In case of missing entries this is due to restrictions by the certificate holder
