A-FS&CS Certificate
This certificate is issued by the Certification Body “Safety and Security for Automation & Grid” at the business area Automation – Functional Safety & Cyber Security for Hardware / Software products. The issue is based upon a documented voluntary assessment of the product by the accredited certification body.
With the assessment of these kinds of products it is shown that the product tested meets the requirements of the relevant standards and the product specification of the manufacturer and is therefore suitable for the specified use under consideration of the conditions specified in the installation and operating instructions for the product.
So far the product tested is intended for the use in safety-related applications a safety performance is shown in accordance with a specified safety level (SIL, PL, etc.) following the requirements of the relevant standards, and that they therefor are suitable for the use in safety functions up to the defined SIL / PL.
All relevant aspects concerning product/electrical safety, functional safety and the aptitude to operate as specified under the defined environmental and ambient conditions as well as the information for the user are inspected.
View all Types of Certificates›
Certificate Details
x
Print |
Bookmark
Certificate/Reg.-No. |
968/FSP 1044.01/21 |
Type of Certificate |
|
Certificate Holder |
ACE Schmersal |
Manufacturer | ACE Schmersal |
Product Category |
Safety Components for Lift Applications |
Subject |
Monitoring circuits |
Type Designation |
Modulo Prote |
Codes and Standards |
- EN 81-20:2020, 5.11.2.3.2 + 5.11.2.3.3
- EN 81-50:2020, 5.15
|
Scope and Result |
For use in passenger lifts and goods passenger lifts for feedback-free monitoring of switching states at the safety electric ciruit of a lift system. |
Specific Provisions |
The instructions in the associated operating manual and the annex to this Certificate shall be considered. |
Valid Until |
2026-05-06 |
Appendixes |
Annex_Certificate_FSP1044_01_21.pdf |
Download Certificate |
968_FSP_1044_01_21_en_el.pdf |
TÜV Rheinland