A-FS&CS Certificate
This certificate is issued by the Certification Body “Safety and Security for Automation & Grid” at the business area Automation – Functional Safety & Cyber Security for Hardware / Software products. The issue is based upon a documented voluntary assessment of the product by the accredited certification body.
With the assessment of these kinds of products it is shown that the product tested meets the requirements of the relevant standards and the product specification of the manufacturer and is therefore suitable for the specified use under consideration of the conditions specified in the installation and operating instructions for the product.
So far the product tested is intended for the use in safety-related applications a safety performance is shown in accordance with a specified safety level (SIL, PL, etc.) following the requirements of the relevant standards, and that they therefor are suitable for the use in safety functions up to the defined SIL / PL.
All relevant aspects concerning product/electrical safety, functional safety and the aptitude to operate as specified under the defined environmental and ambient conditions as well as the information for the user are inspected.
View all Types of Certificates›
Certificate Details
x
Print |
Bookmark
| Certificate/Reg.-No. |
968/M 315.05/21 |
| Type of Certificate |
|
| Certificate Holder |
BBH Products GmbH |
| Manufacturer | BBH Products GmbH |
| Product Category |
Logic Units > Safety PLCs
Logic Units > Monitoring Devices |
| Subject |
Modular safety controller for monitoring of drive systems |
| Type Designation |
SMX 10/P and SMX 11/P |
| Codes and Standards |
- EN ISO 13849-1:2015
- EN 62061:2005+ AC:2010 + A1:2013 + A2:2015
- EN 61508 Parts 1-7:2010
- EN 81-50:2020, 5.6 + 5.15 + 5.16
- EN 81-1:1998+ A3:2009, Annexes F, H
- EN 81-2:1998+ A3:2009, Annexes F, H
|
| Scope and Result |
Safety controller for the safe monitoring of position and speed of drive systems and safe evaluation of connected sensors. The safety controllers are suitable for the use as PESSRAL in accordance with EN 81-20/-50 resp. EN 81-1/-2 in safety functions up to SIL 3. |
| Specific Provisions |
The instructions of the associated Installation and Operating Manual shall be considered. |
| Valid Until |
2025-05-05 |
| Appendixes |
n/a |
| Download Certificate |
968_M_315_05_21_de_en_el.pdf |
TÜV Rheinland
