| Certificate/Reg.-No. | 01/205U/5476.00/22 |
| Type of Certificate | UK Type-Examination Certificate (Supply of Machinery (Safety) Regulations 2008) |
| Certificate Holder | Banner Engineering Corp. |
| Product Category | Sensors, Transmitters, Guards > Opto-electronic Protective Devices |
| Product Tested | Active Opto-electronic Protective Device (AOPD Type 4), Safety Light Curtain |
| Type Designation | EZ-SCREEN® LS SLL or SLLV (v) (w) (x) – (y) (z)- (za) where: (v)= Type: C: cascadable or blank: stand-alone; (w)= Order Options: E:Emitter, R:Receiver, P:Pair; (x)= Resolution in mm: 14, 23, 40 (for SLL), 23, 40 (for SLL "XL" models), 23 (for SLLV); (y)= Length of detection zone in mm: 280, 350, …, 1820 (for SLL/SLLV), 1890L, 1960L, …, 2380L (for SLL “XL” models); (z)= Connector options: blank, P5, P55, P8, P88 (for SLL and SLL “XL” models) - blank (for SLLV) (za)= Special non-construction related, non-safety related configurations: Up to seven alphanumeric characters |
| Codes and Standards |
|
| Intended Application | Safeguarding at machines and other hazardous applications. The AOPD complies with the requirements of the relevant standards (Type 4 acc. to EN IEC 61496-1/-2, Cat. 4 / PL e acc. to EN ISO 13849-1, SIL 3 acc. to EN 61508) and can be used in applications up to PL e and SIL 3. |
| Specific Requirements | The provisions defined in the User Manual shall be considered. |
| Valid Until | 2027-02-02 |
| Appendixes | n/a |
| Download Certificate | 01_205U_5476_00_22_en_el.pdf |
| Certificate/Reg.-No. | Certificate Holder | Product Category | Product Tested | Type Designation | Details |
|---|
| 01/205U/5476.00/22 | Banner Engineering Corp. | Sensors, Transmitters, Guards → Opto-electronic Protective Devices | Active Opto-electronic Protective Device (AOPD Type 4), Safety Light Curtain | EZ-SCREEN® LS SLL or SLLV (v) (w) (x) – (y) (z)- (za) where: (v)= Type: C: cascadable or blank: stand-alone; (w)= Order Options: E:Emitter, R:Receiver, P:Pair; (x)= Resolution in mm: 14, 23, 40 (for SLL), 23, 40 (for SLL "XL" models), 23 (for SLLV); (y)= Length of detection zone in mm: 280, 350, …, 1820 (for SLL/SLLV), 1890L, 1960L, …, 2380L (for SLL “XL” models); (z)= Connector options: blank, P5, P55, P8, P88 (for SLL and SLL “XL” models) - blank (for SLLV) (za)= Special non-construction related, non-safety related configurations: Up to seven alphanumeric characters | View Details | View PDF |
Remark: In case of missing entries this is due to restrictions by the certificate holder
