EC Type-Examination Certificate (Machinery Directive)
This certificate is issued by the Notified Body for Machinery at the TÜV Rheinland Industrie Service GmbH (NB No. 0035) for safety components according to Annex IV No. 19, 20 or 21 of the European Machinery Directive. The issue is based upon a documented type-examination/assessment of the product by the accredited test lab of the business area Automation – Functional Safety & Cyber Security and a subsequent conformity assessment against the requirements of Annex I of the Machinery Directive.
With the type-examination of these kinds of products it is shown that the product tested meets the requirements of the relevant standards and the product specification of the manufacturer and is therefore suitable for the use in the intended safety-related applications under consideration of the conditions specified in the installation and operating instructions for the product.
For these products a safety performance is shown in accordance with a specified safety level (SIL, PL, etc.) following the requirements of the relevant standards, and that they therefor are suitable for the use in safety functions up to the defined SIL / PL.
The standards forming the basis of testing are, so far relevant:
- Product standards (IEC 61496-1/-2/-3/-4-x, e.g.)
- Standards for functional safety (EN ISO 13849-1/-2, IEC 62061, IEC 61508)
- Standards for electrical safety, equipment, marking (EN 50178, IEC 60204-1, e.g.)
- Standards for environmental and EMC requirements (IEC 61131-2, IEC 61326-3-1, IEC 61000-6-7, e.g.)
View all Types of Certificates›
Certificate Details
x
Print |
Bookmark
Certificate/Reg.-No. |
01/205/5926.00/23 |
Type of Certificate |
|
Certificate Holder |
ABB Electrification Sweden AB |
Product Category |
Sensors, Transmitters, Guards > Position / Proximity Switches |
Product Tested |
Solenoid Interlock Switches for Guard Position and Lock Monitoring |
Type Designation |
Mkey9RF,
Mkey8/10RF,
Mkey8ZRF |
Codes and Standards |
- EN 60947-5-3:2013
- EN IEC 60947-5-2:2020, clause 8.4
- EN ISO 13849-1:2015
- EN 61508 Parts 1-7:2010
|
Intended Application |
The Solenoid Interlocking Switches comply with the requirements of Cat. 4 / PL e and SIL 3 acc. EN ISO 13849-1 and IEC 61508. They can be used up to these safety levels and up to SIL 3 acc. EN IEC 62061:2021. Furthermore the products comply with the product standard IEC 60947-5-3 and can be used as type 4 devices with high coding acc. ISO 14119:2013. If EDM (External Device Monitoring) and restart interlock function (acc. EN 62046:2018) is required then RT6 series Safety Relays have to be used, as described within the product data sheet. |
Specific Requirements |
The instructions of the associated Installation, Operating and Safety Manual shall be considered. |
Valid Until |
2028-04-24 |
Appendixes |
n/a |
Download Certificate |
01_205_5926_00_23_en_el.pdf |
TÜV Rheinland