Certificate/Reg.-No. | 968/V 1069.01/23 |
Type of Certificate | A-FS&CS Certificate |
Certificate Holder | AIRTEC Pneumatic GmbH |
Manufacturer | AIRTEC Pneumatic GmbH |
Product Category | Actuators > Valves |
Subject | Pneumatic control valve |
Type Designation | M-07-311-HN-142-SIL, M-07-311-HN-912-SIL, MN-06-311-HN-142-SIL, MN-06-311-HN-152-SIL, MN-06-311-HN-912-SIL |
Codes and Standards |
|
Scope and Result | The valves are suitable for use in a safety instrumented system up to SIL 2 (low demand mode) and SIL 1 (high demand mode of operation). Under consideration of the minimum required hardware fault tolerance HFT = 1 for the complete final element the valves may be used up to SIL 3. |
Specific Provisions | The instructions of the associated Installation, Operating and Safety Manual shall be considered. |
Valid Until | 2028-08-17 |
Appendixes | n/a |
Download Certificate | 968_V_1069_01_23_de_en_el.pdf |
Certificate/Reg.-No. | Certificate Holder | Product Category | Product Tested | Type Designation | Details |
---|
968/V 1069.01/23 | AIRTEC Pneumatic GmbH | Actuators → Valves | Pneumatic control valve | M-07-311-HN-142-SIL, M-07-311-HN-912-SIL, MN-06-311-HN-142-SIL, MN-06-311-HN-152-SIL, MN-06-311-HN-912-SIL | View Details | View PDF |
Remark: In case of missing entries this is due to restrictions by the certificate holder