Certificate/Reg.-No. | 01/205/0680.02/19 |
Type of Certificate | EC Type-Examination Certificate (Machinery Directive) |
Certificate Holder | FRABA GmbH |
Product Category | Sensors, Transmitters, Guards > Pressure Sensitive Edges |
Product Tested | Opto-electronic safety edge |
Type Designation | OSE-1020, OSE-1021, OSE-1022, OSE-3020, OSE-3021, OSE-3022, OSE-4000, OSE-4001, OSE-4002 |
Codes and Standards |
|
Intended Application | The products comply with the requirements of EN ISO 13856-2 and could be used as pressure sensitive safety sensor to protect the closing edge of motor operated gates in accordance with EN 12978. The different Models comply with the following safety requirements in accordance with EN ISO 13849-1: - OSE-1020, OSE-1021, OSE-1022: Kat./Cat. 1, PL c - OSE-3020, OSE-3021, OSE-3022: Kat./Cat. 3, PL d - OSE-4000, OSE-4001, OSE-4002: Kat./Cat. 4, PL e |
Specific Requirements | The instructions of the associated Installation and Operating Manual shall be considered. The requirements according to section 4.23 of EN 13856-2 are only fulfilled in the sense that the limit value violations are compensated by a reduction of the stopping distance. |
Valid Until | 2024-02-28 (Certificate expired) |
Appendixes | n/a |
Download Certificate | 01_205_0680_02_19_de_en_el.pdf |
Certificate/Reg.-No. | Certificate Holder | Product Category | Product Tested | Type Designation | Details |
---|
01/205/0680.02/19expired | FRABA GmbH | Sensors, Transmitters, Guards → Pressure Sensitive Edges | Opto-electronic safety edge | OSE-1020, OSE-1021, OSE-1022, OSE-3020, OSE-3021, OSE-3022, OSE-4000, OSE-4001, OSE-4002 | View Details | View PDF |
Remark: In case of missing entries this is due to restrictions by the certificate holder