| Certificate/Reg.-No. | 01/205/5716.00/19 |
| Type of Certificate | EC Type-Examination Certificate (Machinery Directive) |
| Certificate Holder | Baumer Hübner GmbH |
| Product Category | Sensors, Transmitters, Guards > for Motion and Position |
| Product Tested | Absolute Encoder with safety SinCos-Interface |
| Type Designation | AK8Y / AK8W / AMG77 S |
| Codes and Standards |
|
| Intended Application | Safe measurement of rotational direction, standstill, speed, acceleration, and relative position at rotary machines. The encoders comply with the requirements of the relevant standards (Cat. 3 / PL d acc. to EN ISO 13849-1, SIL 2 / SIL CL 2 acc. to EN 61800-5-2 / IEC 61508 / IEC 62061) and can be used in applications up to these safety levels in conjunction with an appropriate upstream device (safety PLC or safety drive controller) which provides signal monitoring and diagnostic coverage. |
| Specific Requirements | The instructions of the associated Installation and Operating Manual shall be considered. A power cycle of the device once a year is mandatory. The user is always obliged to perform a risk analysis and to check whether the device can be used in the specific application. |
| Valid Until | 2024-05-10 (Certificate expired) |
| Appendixes | n/a |
| Download Certificate | 01_205_5716_00_19_en_el.pdf |
| Certificate/Reg.-No. | Certificate Holder | Product Category | Product Tested | Type Designation | Details |
|---|
| 01/205/5716.00/19expired | Baumer Hübner GmbH | Sensors, Transmitters, Guards → for Motion and Position | Absolute Encoder with safety SinCos-Interface | AK8Y / AK8W / AMG77 S | View Details | View PDF |
Remark: In case of missing entries this is due to restrictions by the certificate holder
