| Certificate/Reg.-No. | 968/EZ 398.02/19 |
| Type of Certificate | A-FS&CS Certificate |
| Certificate Holder | EUCHNER GmbH + Co. KG |
| Product Category | Actuators > Contact Extension Units |
| Subject | Contact Extension Unit with time delay |
| Type Designation | ESM-TE301(-05s), ESM-TE301P(-05s), ESM-TE302, ESM-TE302P, ESM-TE303, ESM-TE303P |
| Codes and Standards |
|
| Scope and Result | Use in safety related applications for controlled machine stop acc. to EN 60204-1 stop category 1. The contact extension unit ESM-TE30xx fulfils in combination with a suitable basis safety unit of the EUCHNER ESM-series the requirements for PL d / Cat. 3 acc. to EN ISO 13849-1 and SIL 2 acc. to EN 62061 and is suitable for use in applications up to PL d and SIL 2, if the feedback contacts are properly monitored. |
| Specific Provisions | The instructions of the associated Installation and Operating Manual shall be considered. |
| Valid Until | 2024-08-01 |
| Appendixes | n/a |
| Download Certificate | 968_EZ_398_02_19_de_en_el.pdf |
| Certificate/Reg.-No. | Certificate Holder | Product Category | Product Tested | Type Designation | Details |
|---|
| 968/EZ 398.02/19 | EUCHNER GmbH + Co. KG | Actuators → Contact Extension Units | Contact Extension Unit with time delay | ESM-TE301(-05s), ESM-TE301P(-05s), ESM-TE302, ESM-TE302P, ESM-TE303, ESM-TE303P | View Details | View PDF |
Remark: In case of missing entries this is due to restrictions by the certificate holder
