| Certificate/Reg.-No. | 01/205/5755.00/20 |
| Type of Certificate | EC Type-Examination Certificate (Machinery Directive) |
| Certificate Holder | ACE Schmersal |
| Product Category | Sensors, Transmitters, Guards > Guard Interlocking Devices |
| Product Tested | Trapped key system For detailed type designations see current "Revision List". |
| Type Designation | SHGV system consisting of the components SHGV…, SHGV/ESS… and SVM… or the components SHGV…, SVE… and SVM…, - guard locking device, type SHGV, with one operating head, - guard locking device, type SHGV, with two operating heads, - guard locking device, type SHGV, with a second lock barrel, - key operated selector with interlocking device with electromagnetic principle of operation, type SVE, - key operated selector with interlocking device with mechanical principle of operation, type SVM - key operated selector switch, type SHGV / ESS |
| Codes and Standards |
|
| Intended Application | The system complies with the requirements of the relevant standards and meets Cat. 3/PL d acc. to EN ISO 13849-1. Accordingly it can be used in applications up to this safety level. The safety switchgears are classified acc. to ISO 14119 as type 2 interlocking devices. |
| Specific Requirements | Trapped key system, consisting of the components SHGV…, SHGV/ESS… and SVM…: This combination can only be used for applications, in which the hazardous situation is eliminated without delay (e. g. run-on movements) after the switch-off command from the key-operated selector switch. Trapped key system, consisting of the components SHGV…, SVE… and SVM…: If the control part of the machine transmits a signal to the SVE… that the hazardous situation has been eliminated, the key can be withdrawn from the SVE…, as a result of which the movable safety guard can be opened. If a delay device (e. e. timer) is used to by-pass the stopping time, a failure of this device must not cause the delay time to be reduced. The instructions of the associated Installation and Operating Manual shall be considered. |
| Valid Until | 2025-03-06 |
| Appendixes | 01_205_5755_00_20_RL_2023_06_16.pdf |
| Download Certificate | 01_205_5755_00_20_en_el.pdf |
| Certificate/Reg.-No. | Certificate Holder | Product Category | Product Tested | Type Designation | Details |
|---|
| 01/205/5755.00/20 | ACE Schmersal | Sensors, Transmitters, Guards → Guard Interlocking Devices | Trapped key system For detailed type designations see current "Revision List". | SHGV system consisting of the components SHGV…, SHGV/ESS… and SVM… or the components SHGV…, SVE… and SVM…, - guard locking device, type SHGV, with one operating head, - guard locking device, type SHGV, with two operating heads, - guard locking device, type SHGV, with a second lock barrel, - key operated selector with interlocking device with electromagnetic principle of operation, type SVE, - key operated selector with interlocking device with mechanical principle of operation, type SVM - key operated selector switch, type SHGV / ESS | View Details | View PDF |
Remark: In case of missing entries this is due to restrictions by the certificate holder
