| Certificate/Reg.-No. | 968/FSP 1559.01/21 |
| Type of Certificate | A-FS&CS Certificate |
| Certificate Holder | ABB Engineering (Shanghai) Ltd. |
| Manufacturer | ABB Engineering (Shanghai) Ltd. |
| Product Category | Sensors, Transmitters, Guards > for Filling Level |
| Subject | Magnetostrictive Liquid Level Transmitter |
| Type Designation | LMT100, LMT200, LMT300 For details see actual “Revision List” |
| Codes and Standards |
|
| Scope and Result | The product complies with the requirements of relevant standards (SC 3 and SIL 2 according to IEC 61508) and can be used in safety-related applications up to SIL 2 with a hardware fault tolerance of HFT=0 and up to SIL 3 with at least a hardware fault tolerance of HFT=1. The product was also reviewed in reference to the applicable requirements of IEC 61511-1:2016 + Corr.1:2016 + AMD1:2017 applicable during a type examination and can be used in application as such. Further details see page 2 of certificate. |
| Specific Provisions | The instructions of the associated Safety Manual shall be considered. |
| Valid Until | no expiry date |
| Appendixes |
Page 2 of 1559_01_21 FSP_1559_01_21_RL_2021_11_30 |
| Download Certificate | 968_FSP_1559_01_21_en_el.pdf |
| Certificate/Reg.-No. | Certificate Holder | Product Category | Product Tested | Type Designation | Details |
|---|
| 968/FSP 1559.01/21 | ABB Engineering (Shanghai) Ltd. | Sensors, Transmitters, Guards → for Filling Level | Magnetostrictive Liquid Level Transmitter | LMT100, LMT200, LMT300 For details see actual “Revision List” | View Details | View PDF |
Remark: In case of missing entries this is due to restrictions by the certificate holder
