| Certificate/Reg.-No. | 968/V 1244.00/21 |
| Type of Certificate | A-FS&CS Certificate |
| Certificate Holder | Borsig ValveTech GmbH |
| Product Category | Actuators > Valves |
| Subject | Ball Valves (Split Body Design) |
| Type Designation | CBV-SB DN 65 – DN 1200 / Class 150 – Class 2500 SOBV-SB DN 50 – DN 1200 / Class 150 – Class 2500 |
| Codes and Standards |
|
| Scope and Result | Safety Function: Close / Open on Demand The valves are suitable for use in a safety instrumented system up to SIL 2 (low demand mode). Under consideration of the minimum required hardware fault tolerance HFT = 1 the valves may be used in a redundant architecture up to SIL 3. |
| Specific Provisions | The instructions of the associated Installation, Operating and Safety Manual shall be considered. |
| Valid Until | no expiry date |
| Appendixes | n/a |
| Download Certificate | 968_V_1244_00_21_de_en_el.pdf |
| Certificate/Reg.-No. | Certificate Holder | Product Category | Product Tested | Type Designation | Details |
|---|
| 968/V 1244.00/21 | Borsig ValveTech GmbH | Actuators → Valves | Ball Valves (Split Body Design) | CBV-SB DN 65 – DN 1200 / Class 150 – Class 2500 SOBV-SB DN 50 – DN 1200 / Class 150 – Class 2500 | View Details | View PDF |
Remark: In case of missing entries this is due to restrictions by the certificate holder
