| Certificate/Reg.-No. | 968/EL 623.04/22 |
| Type of Certificate | A-FS&CS Certificate |
| Certificate Holder | ABB Engineering (Shanghai) Ltd. |
| Product Category | Sensors, Transmitters, Guards > for Furnaces/Burners |
| Subject | Flame Detector |
| Type Designation | Uvisor SF810i-(LOS/FOC)-(IR/UV/UVIR)-(T/TX/TL/Q/QC/QE) Uvisor SF810i-(LOS/FOC)-(IR/UV/UVIR)-(T/TX/TL/Q/QC/QE)-L |
| Codes and Standards |
|
| Scope and Result | The flame monitors comply with the requirements of EN 298 for the use in industrial appliances and SIL 2 acc. to IEC 61508 and can be used in applications up to SIL 2 in the application area of IEC 61511-1 and others. |
| Specific Provisions | The instructions of the associated Installation, Operating and Safety Manual shall be considered. The flame detector is not designed for direct control of shutoff valves. |
| Valid Until | no expiry date |
| Appendixes | n/a |
| Download Certificate | Publication is performed following EA Rule EA-3/01 M: 2021 |
| Certificate/Reg.-No. | Certificate Holder | Product Category | Product Tested | Type Designation | Details |
|---|
| 968/EL 623.04/22 | ABB Engineering (Shanghai) Ltd. | Sensors, Transmitters, Guards → for Furnaces/Burners | Flame Detector | Uvisor SF810i-(LOS/FOC)-(IR/UV/UVIR)-(T/TX/TL/Q/QC/QE) Uvisor SF810i-(LOS/FOC)-(IR/UV/UVIR)-(T/TX/TL/Q/QC/QE)-L | View Details | No PDF available |
Remark: In case of missing entries this is due to restrictions by the certificate holder
