|Type of Certificate||A-FS&CS Certificate|
|Certificate Holder||Ace Valve CO., LTD.|
|Manufacturer||Ace Valve CO., LTD.|
|Product Category||Actuators > Valves|
|Codes and Standards||
|Scope and Result||Safety Function: Upon demand the valve operation system drives the valve into the safe state. The fail position may be defined as closed or open.
The valves are suitable for use in a safety instrumented system up to SIL 2 (low demand mode). Under consideration of the minimum required hardware fault tolerance HFT = 1 for the complete final element the valves may be used up to SIL 3.
|Specific Provisions||The instructions of the associated Installation, Operating and Safety Manual shall be considered.|
|Certificate/Reg.-No.||Certificate Holder||Product Category||Product Tested||Type Designation||Details|
Remark: In case of missing entries this is due to restrictions by the certificate holder