Certificate/Reg.-No. | 01/205/5744.01/22 |
Type of Certificate | EC Type-Examination Certificate (Machinery Directive) |
Certificate Holder | CEDES AG |
Product Category | Sensors, Transmitters, Guards > Opto-electronic Protective Devices |
Product Tested | Active optoelectronic protective device for protecting the leading edge of power operated doors and gates |
Type Designation | Sensors: OGD - x1 – 6 x2 x3 x4 RAY – NC - x1 – 6 x2 x3 x4 OGD – 5 0 1 x2, OGD – 5 0 2 x2 x1 = S, T, R, A x2 = 1,2, …,6 x3 = 1, 2, 3 x4 = 0, 1, …,9 Control Unit: OSE-C 5024 |
Codes and Standards |
|
Intended Application | The devices comply with the requirements of the relevant standards (Cat. 2 / PL d acc. to EN ISO 13849-1) and can therefore be used as a switching protective device on the main closing edge for the application range of EN 12978 on power-operated, vertically moving doors with reversing operation up to PL d. The sensors in combination with the control unit can be used as electro-sensitive protective equipment (ESPE) for application areas C and E in accordance with section 5.1.3 of EN 12453. The application to other machines is not intended. |
Specific Requirements | The instructions of the associated Installation and Operating Manual shall be considered. |
Valid Until | 2024-12-16 |
Appendixes | n/a |
Download Certificate |
01_205_5744_01_22_en_el.pdf 01_205_5744_01_22_de_el.pdf |
Certificate/Reg.-No. | Certificate Holder | Product Category | Product Tested | Type Designation | Details |
---|
01/205/5744.01/22 | CEDES AG | Sensors, Transmitters, Guards → Opto-electronic Protective Devices | Active optoelectronic protective device for protecting the leading edge of power operated doors and gates | Sensors: OGD - x1 – 6 x2 x3 x4 RAY – NC - x1 – 6 x2 x3 x4 OGD – 5 0 1 x2, OGD – 5 0 2 x2 x1 = S, T, R, A x2 = 1,2, …,6 x3 = 1, 2, 3 x4 = 0, 1, …,9 Control Unit: OSE-C 5024 | View Details | View PDF |
Remark: In case of missing entries this is due to restrictions by the certificate holder