| Certificate/Reg.-No. | 01/205U/5566.00/22 |
| Type of Certificate | UK Type-Examination Certificate (Supply of Machinery (Safety) Regulations 2008) |
| Certificate Holder | Banner Engineering Corp. |
| Product Category | Logic Units > Monitoring Devices |
| Product Tested | Safety Control Modules |
| Type Designation | AT-FM-10K Two-Hand Safety Control Module, GM-FA-10J Gate Monitoring Safety Control Modules |
| Codes and Standards |
|
| Intended Application | The Safety Control Modules are intended to be part of safety related control systems of machines, where the safe state is the de-energized state. In combination with self-checking touch buttons (STB) or hard contacts the AT-FM-10K can be used as Type IIIC 2-hand control module acc. to EN ISO 13851 in applications up to PLe / Cat. 4 e and SIL 3. If connected to suitable interlock switches, the GM-FA-10J-x modules comply with PDDB acc. to IEC 60947-5-3 and can be used in guard position monitoring applications up to PLe / Cat. 4 and SIL 3. The AT-FM-10K and GM-FA-10J-x are suitable for use in the application area of EN IEC 62061:2021 up to SIL 3. |
| Specific Requirements | The instructions of the associated Installation, Operating and Safety Manual shall be considered. |
| Valid Until | 2027-09-28 |
| Appendixes | n/a |
| Download Certificate | 01_205U_5566_00_22_en_el.pdf |
| Certificate/Reg.-No. | Certificate Holder | Product Category | Product Tested | Type Designation | Details |
|---|
| 01/205U/5566.00/22 | Banner Engineering Corp. | Logic Units → Monitoring Devices | Safety Control Modules | AT-FM-10K Two-Hand Safety Control Module, GM-FA-10J Gate Monitoring Safety Control Modules | View Details | View PDF |
Remark: In case of missing entries this is due to restrictions by the certificate holder
