| Certificate/Reg.-No. | 01/205U/5476.01/22 |
| Type of Certificate | UK Type-Examination Certificate (Supply of Machinery (Safety) Regulations 2008) |
| Certificate Holder | Banner Engineering Corp. |
| Product Category | Sensors, Transmitters, Guards > Opto-electronic Protective Devices |
| Product Tested | Active Opto-electronic Protective Device (AOPD Type 4), Safety Light Curtain |
| Type Designation | EZ-SCREEN® LS EZLSA-HTE – (w) (x) – (y) (z) – (za) and SLL or SLLV (v) (w) (x) – (y) (z)- (za) where: (v)= Type: C cascade or blank: stand-alone (w)= Order Options: E: Emitter, R: Receiver, P: Pair (x)= Resolution in mm: 14, 23, 40 (for SLL); 23, 40 (for SLL “XL” models); 23 (for SLLV and EZLSA-HTE) (y)= Length of detection zone in mm: 280, 350, …, 1820 (for SLL and SLLV); 1890L, 1960L, …, 2380L (for SLL “XL” models). Length of detection zone in mm for EZLSA-HTE: 280, 350, …, 1050. (z)= Connector options: blank, P5, P55, P8, P88 (for SLL and SLL “XL” models); blank (for SLLV and EZLSA-HTE); F = Remote Fixed Blanking EZLSA-HTE Receiver (za)= Special non-construction related, non-safety related configurations: Up to seven alphanumeric characters |
| Codes and Standards |
|
| Intended Application | Safeguarding at machines and other hazardous applications. The AOPD complies with the requirements of the relevant standards (Type 4 acc. to EN IEC 61496-1/-2, Cat. 4 / PL e acc. to EN ISO 13849-1, SIL 3 acc. to EN 61508) and can be used in applications up to PL e and SIL 3. |
| Specific Requirements | The provisions defined in the User Manual shall be considered. |
| Valid Until | 2027-11-15 |
| Appendixes | n/a |
| Download Certificate | 01_205U_5476_01_22_en_el.pdf |
| Certificate/Reg.-No. | Certificate Holder | Product Category | Product Tested | Type Designation | Details |
|---|
| 01/205U/5476.01/22 | Banner Engineering Corp. | Sensors, Transmitters, Guards → Opto-electronic Protective Devices | Active Opto-electronic Protective Device (AOPD Type 4), Safety Light Curtain | EZ-SCREEN® LS EZLSA-HTE – (w) (x) – (y) (z) – (za) and SLL or SLLV (v) (w) (x) – (y) (z)- (za) where: (v)= Type: C cascade or blank: stand-alone (w)= Order Options: E: Emitter, R: Receiver, P: Pair (x)= Resolution in mm: 14, 23, 40 (for SLL); 23, 40 (for SLL “XL” models); 23 (for SLLV and EZLSA-HTE) (y)= Length of detection zone in mm: 280, 350, …, 1820 (for SLL and SLLV); 1890L, 1960L, …, 2380L (for SLL “XL” models). Length of detection zone in mm for EZLSA-HTE: 280, 350, …, 1050. (z)= Connector options: blank, P5, P55, P8, P88 (for SLL and SLL “XL” models); blank (for SLLV and EZLSA-HTE); F = Remote Fixed Blanking EZLSA-HTE Receiver (za)= Special non-construction related, non-safety related configurations: Up to seven alphanumeric characters | View Details | View PDF |
Remark: In case of missing entries this is due to restrictions by the certificate holder
